No Brand for now

15 Viewers

GEAR AID Seam Grip SIL Silicone Tent Sealant 10440

We will deliver your goods as soon as possible
HKD97.00

SKU GEAR AID Seam Grip SIL Silicone Tent Sealant 10440 Specification Material: silicone rubber Size: 1.5 oz Color: clear Adheres To: silicone treated fabrics Coverage: 288” x 0.25” (24’ of seams) Cure Time: 3-6 hours Cure Method: humidity Application Temp

About this product

SKU GEAR AID Seam Grip SIL Silicone Tent Sealant 10440 Specification Material: silicone rubber Size: 1.5 oz Color: clear Adheres To: silicone treated fabrics Coverage: 288” x 0.25” (24’ of seams) Cure Time: 3-6 hours Cure Method: humidity Application Temperature: 60° to 100°F Use ...SKU GEAR AID Seam Grip SIL Silicone Tent Sealant 10440 Specification Material: silicone rubber Size: 1.5 oz Color: clear Adheres To: silicone treated fabrics Coverage: 288” x 0.25” (24’ of seams) Cure Time: 3-6 hours Cure Method: humidity Application Temperature: 60° to 100°F Use Temperature: -20° to 180°F Storage: Store in cool, dry place Made in USA Highlights Seam sealing with Seam Grip SIL is the best way to keep moisture out when using a silnylon (silicone-nylon) tent. Previously known as SilNet, this clear sealant dries to a flexible rubber that works on all silicone treated gear including nylon tarps and ultralight backpacks. A single 1.5 oz tube can seal up to 24 ft of seams. Fast and easy to use, it’s also handy for pinhole repairs and small tears. When you need to waterproof a silnylon tent only a silicone sealant will work, because silicone will only adhere to silicone. So, treat gear right and seal out the weather with Seam Grip SIL. Compatible – Bonds to silicone treated fabrics to prevent water from seeping through seams Waterproof – Provides a water-tight seal that won’t peel or crack over time, keeping you warm and dry Long-lasting – Rubber sealant seals seams and patches pinhole leaks for repairs that last for years Flexible – Cures to an elastic, rubber seal that flexes and stretches with high performance gear Weather-resistant – Tough formula is not affected by extreme heat or cold Instructions 1) Clean and dry surface 2) SEAMS: Apply a thin film across seams and under fabric folds. Apply above 60°F (16°C) PINHOLES: Create backing with tape. Fill hole, spreading 1/4"(6mm) past damaged area. Remove tape when dry 3) Keep Level until fully cured (3-6 hours) Test for dryness before folding or using 4) Store in cool, dry place Caution EYE IRRITANT: Avoid contact with eyes. In case of contact, flush with fresh water for 15 minutes. Contact physician if irritation persists. OVER-EXPOSURE MAY CAUSE SKIN IRRITATION: Avoid skin contact. Do not handle contact lenses with product on hands. Avoid breathing vapor. Provide adequate ventilation to reduce vapors below discomfort level. In case of inhalation discomfort, remove to fresh air. In case of skin contact, wipe off and flush with water. Obtain medical attention irritation occurs. Keep out of reach of children

Often bought with


GEAR AID Seam Grip SIL Silicone Tent Sealant 10440 FAQs

Still have unanswered questions and need to get in touch?

Contact us

Recipes

The Best Gifts for Campers

The Best Gifts for Campers

Gear Guides, Camping Essentials, Outdoor Accessories, Adventure Gear, Gift Ideas, Camping Gear, Outdoor Equipment, Recreational Gear, Nature Gifts
lxh
The Best Camp Coffee Makers of 2024: Tested

The Best Camp Coffee Makers of 2024: Tested

Gear Guides, Camping Gear, Outdoor Cooking, Coffee Equipment, Adventure Essentials
lxh
The Best Budget Sleeping Pads: Tested

The Best Budget Sleeping Pads: Tested

Gear Guides, Camping Gear, Outdoor Equipment, Backpacking Essentials, Sleep Accessories
lxh
Top